Hainan Free Trade Port · One-stop MRO for overseas sites MRO package · Steel · Marine equipment · Procurement
العربية
Power generation · 20 kW to 3000 kW

Generator sets from 20 kW to 3000 kW — specified once, consolidated, shipped together

Four formats — open frame, silent canopy, container and trailer — covering the mainstream diesel range. We specify to your site conditions, assemble the full list, and ship on your vessel schedule, together with camp MRO packages, steel and marine equipment, so you deal with one supplier instead of five.

20–3000 kWPower coverage
4Set formats
3Engine platforms
Hainan FTPShipping base
Selected range

Six mainstream configurations that cover most site demand

The six below are ordered by how they perform on Gulf desert and remote sites: first whether the format survives sand and heat, then the power band and container loading. Container sets land and run, so they lead. Open frame is the best value, but a desert site needs a separate machine room — we only recommend it where a building already exists. All figures are from the maker's catalogue; nothing is estimated.

Container power station

Container power station

Desert-ready 275 – 2200 kVA
  • Standard 20S / 40HC, non-standard on request
  • 6 cm acoustic lining, labyrinth air path
  • Double doors, stainless hinges, integrated control
Typical use · camp prime power, remote sites, rental
Silent canopy generator sets

Silent canopy

Desert-ready 20.6 – 1375 kVA
  • 7 dB(A) attenuation, 75–85 dB(A) at 7 m
  • 3 mm galvanised skin with 6 cm acoustic lining
  • Base tank with level sensor and sight gauge
Typical use · urban sites, hospitals, events, camps
Trailer power station

Trailer power station

Desert-ready 20.6 – 1375 kVA
  • 2, 4, 6 and 8-wheel trailer builds
  • Road speed 75–80 km/h
  • Cloud platform: GPS, video, remote start/stop, alarms
Typical use · rental fleets, temporary power, emergency
KMS series open frame generator set

KMS open frame

Needs machine room 20 – 1500 kW
  • Cummins QSB / QSZ / QSK platform
  • HPI-PT injection with ADEC electronic control
  • Dual-stage fuel and oil filtration
Typical use · data centres, factories, airport hubs, high-rise
WC series open frame generator set

WC open frame

Needs machine room 12 – 3000 kW
  • Weichai WP and M-series platform
  • Rated for −40~50 °C and 5000 m altitude
  • Strong single-step load acceptance to GB/T 2820
Typical use · construction, healthcare, public utilities, husbandry
YC series open frame generator set

YC open frame

Needs machine room 15 – 3000 kW
  • Yuchai platform, fuller charge and atomisation
  • High injection pressure, high power density
  • High-strength crankshaft, shared parts across range
Typical use · public utilities, data centres, mining, airports
Desert & remote

Desert and remote sites: derate first, then specify

Nameplate ratings are set at 40 °C, 1,000 m and 60% RH. Gulf and Iraqi summers push surface temperatures past 55 °C, so real output is lower than the plate. Size the load against the plate and the set runs overloaded for life — the most common specifying error on desert projects.

Temperature and altitude derating (share of nameplate)

Per ISO 8528 and published maker derating matrices
Altitude25 °C40 °C50 °C
0 m100%96%92%
500 m95%91%87%
1,000 m90%86%82%
1,500 m85%80%75%
2,000 m80%75%70%

Example: Riyadh sits near 600 m. For 1,000 kVA usable at 50 °C you need a nameplate of 1,000 ÷ 0.92 ≈ 1,087 kVA. A HAT (high ambient temperature) build holds full rating at 50 °C and removes that 8% gap.

What a desert site actually needs

Omit these and the site fails within a season
  • Three-stage intake: cyclone pre-cleaner, 5 μm main element, safety element, automatic dust ejection. A single paper element clogs in 50–80 hours of dust.
  • Wider fin pitch: 2.0 mm opened to 2.5–3.0 mm to delay dust bridging, plus a reversible fan for timed blow-back.
  • Cabin pressure 30–50 Pa with intakes at least 1.2 m above ground, so ground dust stays out.
  • Control panel IP54 or better, separate dust hoods on the AVR and controller, double gasket seals on doors.
  • C4 / C5-M corrosion class for coastal and humid sites, with 304/316 stainless fasteners.
  • Large tank: 10,000 L keeps a 500 kVA set running about 130 hours at 75% load, cutting fuel runs to remote sites.
  • Anti-condensation heaters: with 25 °C day-night swings, moisture plus dust forms a conductive film inside panels.

Above 600 m or 40 °C, we issue a site-specific derating curve and corrected sizing with the quotation — we do not size straight off the nameplate.

How we supply

What we actually do: specify, consolidate, ship

1

Site brief

Load profile, prime or standby, ambient temperature and altitude, paralleling and changeover needs.

2

Selection

Match set and format to the band, then issue a configuration list with dimensions and interfaces.

3

Consolidation

Sets ship with camp MRO, steel and marine items under one bill of lading.

4

Shipment

Shipped from the Hainan Free Trade Port, tracked through to port of discharge.

We specify, source and consolidate — we are not the set manufacturer. Final figures follow the maker's technical documents and are re-checked line by line before contract.

Send the list — we come back with a configuration

Send the power band, the format and the site conditions. No price in the first exchange — we settle the scope first.

Send us the list